Quick Facts — Work Light LED 100W SmartLED100
- Power 100 W, luminous flux 3500 lm
- Colour temperature 5000K (daylight white), Ra > 80
- Battery 10000 mAh, charger included
- Protection class IP65, impact-resistant front material
- Adjustable light angle 360°, stand tilt 90°
- Three light modes: 20%, 60%, 100% + separate warning flash
- Operating temperature -20°C to +50°C
A battery-powered LED work light at 100 W with a luminous flux of 3500 lm, built for construction sites, garages, workshops and other environments where strong, reliable lighting is needed. The light is swivel-mounted and foldable, making it easy to move and direct where the light is needed.
Protection class IP65 makes the light resistant to dust and water, and the front is protected with an impact-resistant, unbreakable material. The built-in battery makes the light usable even where mains power is unavailable.
What makes the light a good choice for construction sites?
The built-in LEDs are energy-efficient and provide strong illumination in their installation environments. The colour temperature of 5000K gives a neutral, daylight-like light that is comfortable for the eyes, and the light delivers full luminous flux from the start with no warm-up time. With a service life of approximately 30,000 hours, the LEDs handle long-term, regular use.
How long does the battery last across the different light modes?
The light has three modes: 20% brightness lasts up to 10 hours, 60% lasts up to 7 hours, and full 100% power gives up to 4 hours of run time. In addition to these three modes, a separate warning mode with flashing red and blue LEDs is available. The charging port glows red while charging and green when the battery is fully charged, and the light should not be used while charging.
Where does the work light perform best?
The light suits warehouses, garages, workshops, restaurants, sports facilities, industrial halls, shops, car parks and stadiums — anywhere temporary or portable lighting is needed. The 360° swivel angle combined with the stand's 90° tilt lets the light be directed exactly where needed, regardless of work site.
| Model | SmartLED100 (5892) |
| Type | Battery-powered LED work light with stand |
| Power | 100 W |
| Luminous flux | 3500 lm |
| Colour rendering | Ra > 80 |
| Colour temperature | 5000K (daylight) |
| Frequency | 50/60 Hz |
| Service life | 30,000 hours |
| Protection class (electrical) | I |
| IP rating | IP65 |
| Operating temperature | -20°C to +50°C |
| Light dimensions | 17 x 20 cm |
| Dimensions with stand | 30 x 24.5 x 33 cm |
| Battery capacity | 10000 mAh |
| Light modes | 20% (10h) / 60% (7h) / 100% (4h), separate warning flash |
| Light angle | Adjustable 360° |
| Stand tilt | 90° |
| Energy efficiency class | E |
| EAN | 5903707762620 |
Package contents
- Stand
- Work light with battery
- Charger
Suitable for: construction workers, electricians, mechanics, event organisers and warehouse staff needing portable lighting without access to mains power.
Industries: construction and renovation, workshops and vehicle repair, warehousing and logistics, events and sport.
Frequently asked questions (FAQ)
Can the SmartLED100 work light be used while the battery is charging?
No, the light should not be used during charging. The charging port glows red while charging and green when the battery is fully charged, and the light should remain off until charging is complete.
What does the Ra > 80 colour rendering on the SmartLED100 mean in practice?
An Ra value above 80 means the light renders colours reasonably accurately, sufficient for most work tasks but not as precise as lights with higher Ra values intended for colour-critical work. Combined with the 5000K colour temperature, this gives a neutral, daylight-like light that is comfortable for the eyes.
What sets a battery-powered work light like the SmartLED100 apart from a mains-only light?
A battery-powered work light like the SmartLED100 can be used in locations without access to mains power, such as early-stage construction work or remote outdoor sites, whereas a mains-only light requires a power outlet within reach but can in return be used continuously without the battery running down. The SmartLED100 provides up to 4 hours of run time at full power before recharging is needed.