Hammer Drill Driver 12V CXT 30Nm 2-Speed LED White Limited Edition set, MAKITA

Quick Facts – Makita HP333DSAW Hammer Drill Driver 12V CXT Set

• Brand: Makita
• Model: HP333DSAW
• Type: Hammer drill driver, battery-powered
• Voltage: 12V CXT
• Motor: Brushed
• Max Torque: 30 Nm
• Clutch Settings: 10
• Speeds: 2
• Speed Range: 0–450 / 0–1,700 rpm
• Impact Rate: up to 25,500 bpm
• Chuck: 0.8–10 mm keyless
• Weight (with battery): approx. 1.1 kg
• LED Light: Yes
• Colour: White, limited edition
• Included: Battery 12V CXT 2.0Ah (BL1021B), fast charger DC10SB, carry case, 31-piece bit set D-30667

The Makita HP333DSAW is a compact hammer drill driver from the 12V CXT range, supplied as a complete set in a limited edition white finish. The tool operates in three modes — drilling, screwdriving and hammer drilling — covering the most common tasks on site, in installation work and in the workshop. With a maximum torque of 30 Nm, two-speed transmission and 10 clutch settings, the output can be matched precisely to the material and fastener type.

CXT technology (Compact eXtreme Technology) keeps the tool's dimensions compact and the weight at approximately 1.1 kg with battery fitted, reducing fatigue during work in restricted spaces. The keyless chuck accepts accessories from 0.8 to 10 mm and minimises changeover time. An impact rate of up to 25,500 bpm makes the tool capable of drilling in concrete and masonry in lighter classes. The LED work light illuminates the drilling point in low-light conditions.

The set includes the BL1021B 2.0Ah battery, the DC10SB fast charger, Makita's 31-piece bit set D-30667 with the most commonly used PH, PZ and TX bits, and a carry case. The HP333DSAW is part of Makita's 12V CXT system and is compatible with other tools and batteries in the same voltage platform.

What is the Makita HP333DSAW and why should you choose it?

The Makita HP333DSAW is a 3-in-1 hammer drill driver on the 12V CXT platform for those who need a light and compact tool without compromising on capability. The combination of 30 Nm maximum torque, 25,500 bpm impact rate and two-speed transmission makes it suitable for screwdriving in timber and metal through to hammer drilling in lighter concrete and render. The white limited edition finish and the complete set — battery, charger, carry case and bit set — make it ready for use immediately out of the box.

Which environments is the Makita HP333DSAW suited for?

The Makita HP333DSAW suits electricians, plumbers, carpenters and tradespeople across Europe who work in confined spaces and require a lightweight tool for drilling and screwdriving. Its weight and compact dimensions make it well suited for ceiling work, inside distribution boards, pipe installations and similar situations where a larger 18V tool is difficult to manoeuvre. The hammer function covers lighter masonry and render drilling requirements.

Technical Specifications

Set Contents

Suitable for: Electricians, plumbers, carpenters and installation technicians requiring a compact and lightweight 12V tool for daily drilling and screwdriving work.

Industries: Electrical installation, plumbing and HVAC, construction and renovation, interior joinery and light industrial assembly.

Frequently Asked Questions (FAQ)

What maximum torque and impact rate does the Makita HP333DSAW hammer drill driver deliver?

The Makita HP333DSAW delivers a maximum torque of 30 Nm (14 Nm in soft mode) with 10 clutch settings for torque adjustment. The impact rate reaches up to 25,500 bpm. Speed range is 0–450 rpm on gear 1 and 0–1,700 rpm on gear 2. The tool weighs approximately 1.1 kg with the included 12V CXT 2.0Ah battery fitted.

What is included in the Makita HP333DSAW set and which battery comes with it?

The Makita HP333DSAW set includes the HP333 hammer drill driver in white limited edition, a Makita BL1021B battery at 12V CXT 2.0Ah, the DC10SB fast charger, the 31-piece bit set D-30667 and a carry case. The BL1021B battery is compatible with other tools in Makita's 12V CXT platform.

How does the Makita HP333DSAW differ from a standard drill driver without a hammer function?

The Makita HP333DSAW has a built-in hammer function delivering up to 25,500 bpm, enabling drilling into concrete, brick and render — tasks that a standard drill driver without an impact mechanism cannot perform. In screwdriving and standard drill mode the HP333DSAW operates as a conventional drill driver with 30 Nm torque and 10 clutch settings. The compact 12V CXT format keeps the weight at approximately 1.1 kg.