Mounting Cleats Cleat n Feet V2 6 Pack ABS Wall Storage, StealthMounts

Quick Facts — StealthMounts Cleat n Feet Mounting Cleats V2

• Brand: StealthMounts
• Model: OM-LOCL-BLK-6
• Type: Mounting cleats for walls and shelf undersides
• Compatible with: StealthMounts Mounting Feet and Milwaukee Wall Control Locking
• Capacity: Tested to over 45 kg per pair
• Material: Injection moulded ABS plastic with countersunk screw holes
• Quantity: 6 pcs per pack, black
• Made in Great Britain

StealthMounts Mounting Cleats V2 are the anchor points of the wall storage system: screwed to a wall or shelf underside, they receive StealthMounts Mounting Feet and Milwaukee Wall Control Locking accessories, which slide in and lock in place. A pair of cleats is tested for loads over 45 kg — enough for loaded tool boxes.

The cleats are injection moulded in ABS with countersunk screw holes, and the six pieces per pack make three complete hanging points. Made in Great Britain. Genuine product, supplied through official European distribution.

What do the Mounting Cleats V2 do in the wall storage system?

They turn boxes and accessories into wall-mounted modules. The cleat stays fixed to the wall; the counterpart — Mounting Feet on your box or a Milwaukee Locking accessory — hooks into the cleat and locks. The same box can thus hang in the workshop, lift down whole and hook onto another pair of cleats in the van: storage and transport in one system.

How the system builds with cleats and feet

One pair of cleats per hanging point, fitted horizontally to a wall, panel or shelf underside. Mounting Feet screw onto the box — or the built-in lock of Packout Shop accessories engages directly in the slot of the V2 cleat. Six cleats give three points: one in the workshop, one in the van and one in the store room, say, so the same box moves between all three with no refitting.

Technical Specifications

Suitable for: Tradespeople, service technicians, installers and anyone running several tool batteries.

Industries: Construction, electrical, plumbing, vehicle service and mobile workshops.

Frequently Asked Questions (FAQ)

What fits in StealthMounts Mounting Cleats V2?

Two things: the StealthMounts Mounting Feet, which screw onto any box or piece of kit, and Milwaukee Wall Control Locking accessories, which slide directly into the slot of the V2 cleat and lock in place. The cleat screws to a wall, panel or shelf underside through the countersunk holes.

How much weight do StealthMounts Mounting Cleats V2 take?

A pair of cleats is tested for loads over 45 kg, which covers loaded tool boxes and heavier accessories with a solid margin. The capacity assumes the screws go into a load-bearing surface — a stud or plywood sheet, not just the face of plasterboard.

What sets StealthMounts Mounting Cleats V2 apart from screwing the box straight to the wall?

The mobility: a screwed-down box stays where it is, while the cleat system makes the box removable — it unhooks whole, travels to the job and hooks onto another pair of cleats in the van. The V2 version also takes Milwaukee Locking accessories directly, so the wall can mix your own boxes and the Packout system freely.