Pop-Up Tent Gazebo 3x6m Scissor Frame 420D Waterproof with 3 Walls, Tytan

Quick Facts — Tytan Pop-Up Tent 3x6 m

• Dimensions 3x6 m (exactly 2.90 x 5.80 m)
• Scissor frame — unfolds by pulling the frame apart
• Roof canopy 420D, 100% waterproof; walls 210D
• Adjustable entrance height 175–204 cm in four steps
• 3 side walls and carry bag included
• 8 mm spacers between cross braces protect the canopy when folding
• Weight approx. 35 kg without front walls

A pop-up tent in the Tytan series measuring 3x6 metres, for exhibitions, markets and events. The scissor frame means the tent unfolds simply by pulling the frame apart — no loose poles or tools are needed, and one person can handle the assembly.

The roof is made of heavy 420D tarpaulin that is fully resistant to rain and soaking, and the walls of 210D material. We also offer spare parts for all tents in our range, so the tent can be repaired if anything breaks after years of use.

What sets the Tytan series apart?

The Tytan series differs from traditional pop-up tents through spacers between the cross braces in the frame. The elements sit 8 mm apart, whereas the distance in common tents is only 2–3 mm — this practically eliminates the risk of the roof canopy being pinched and cut between the braces when folding. The frame profile is rectangular, giving higher rigidity and strength than the oval profiles most often used in light tents. Plastic sliders make unfolding and folding light and smooth without the frame jamming, and carefully made components protect the canopy from accidental snagging. The canopy corners are reinforced with an extra layer of material where the legs sit, increasing durability at the points most exposed to wear.

How is the tent assembled and adjusted?

The tent unfolds by pulling the frame apart to full size, and the entrance height adjusts in four steps between 175 and 204 cm. The legs have a square profile (3x3 cm upper, 2.5x2.5 cm lower) and a stable base plate that can be anchored to the ground with pegs, securing the tent against gusts of wind. The walls attach to the roof and to each other with hook-and-loop straps along their full length, so you can freely hang 1, 2, 3 or 4 walls in any configuration. Three walls are included, and a fourth front wall can be purchased separately.

Applications for the pop-up tent

The tent suits exhibitions, garden parties, corporate events, promotional and event activities, paddock use at racing, break and café tents, and market stalls. We can also offer printing with logo and graphics on all sides and the roof of the tent — printing is ordered separately and extends the delivery time by approximately two weeks.

Package contents

• Steel scissor frame
• Roof canopy 420D
• 3 side walls 210D

The tent is delivered in a well-packed carton to avoid transport damage. Please note that all Namaxa tents have the manufacturer's name and address printed on one edge of the roof section — the marking cannot be removed, but the printed side can be turned to the rear so it is not visible from the front.

Handle the tent with care. The warranty covers manufacturing defects only — this type of tent is not intended for strong winds, storms or being left up for extended periods. If needed, we offer spare parts at low prices (spare parts are not covered by the warranty).

Suitable for: exhibitions, garden parties, corporate events, markets and trade stalls, paddock use at racing, and break and café tents at outdoor activities.

Industries: events and trade fairs, retail and market trading, motorsport, restaurants and catering, and private individuals.

Frequently asked questions (FAQ)

Can the Tytan pop-up tent 3x6 m withstand strong winds and long-term pitching?

No, the Tytan pop-up tent 3x6 m is intended for temporary use and does not withstand strong winds or storms. The base plates should be anchored with pegs in windy conditions, and the warranty covers manufacturing defects only — not damage caused by weather or extended pitching.

Are spare parts available for the Tytan pop-up tent 3x6 m?

Yes, we provide ongoing access to all parts for the tents in our range. If the tent is damaged after two, three or five years, frame parts, roof canopy and walls are available to order at low prices, so the tent can be repaired rather than replaced.

What sets a pop-up tent like the Tytan 3x6 m apart from a traditional party tent with pole construction?

A pop-up tent like the Tytan 3x6 m has a pre-assembled scissor frame that unfolds in a few minutes by one person, whereas a traditional party tent is built from loose poles and requires both more time and more people. The pop-up tent weighs approximately 25 kg without front walls and packs into a bag, making it considerably easier to transport between events.

Important to note before purchase

Keep in mind that this is a pop-up tent in the lighter class — the construction is built for easy transport and quick assembly at temporary events, not for standing pitched over longer periods or withstanding strong winds and storms. A tent in this price class does not replace a fixed party tent or a permanent pavilion, and it is important to have the right expectations: handled with care, anchored in wind and taken down after the event, it will last for many years. The warranty covers manufacturing defects only — not damage caused by wind, weather or extended pitching. Should anything break, we offer spare parts at low prices (spare parts are not covered by the warranty), so the tent can be repaired rather than replaced.