Double-Sided Wet Sharpening Stone Grit 400/1000 with Knife Holder and Rubber Holder

Quick Facts — T6140W Wet sharpening stone

• Model: T6140W
• Type: Double-sided wet sharpening stone kit
• Grit: 400 / 1000
• Grit 400 side: Restores dull knives with nicks and damage
• Grit 1000 side: Fine sharpening, makes the edge sharper
• Sharpens: Steel knives, scissors, chisels

Wet sharpening stone T6140W is a double-sided stone with grit 400 and 1000 for steel knives, scissors and chisels, supplied as a kit with a rubber holder and a knife holder.

The grit 400 side restores very dull knives with nicks and damage, while the grit 1000 side fine-sharpens the edge and makes the knife sharper.

The rubber holder stops the stone from sliding on the work surface. The knife holder helps keep the knife at the right angle to the stone and has a ceramic surface against the sharpening stone. It is recommended for knives with a width of at least 0.75 inch.

Key benefits of wet sharpening stone T6140W

Two grits in one stone allow both restoring and fine sharpening without changing stone: grit 400 for damaged edges and grit 1000 for sharpness.

The kit relies on three details that control the sharpening result:

• A rubber holder that prevents the stone from sliding on the work surface.
• A knife holder that makes it easier to hold the knife at the right angle to the stone.
• A ceramic surface on the knife holder against the sharpening stone for maximum service life.

How wet sharpening stone T6140W is used in knife sharpening

Sharpening starts on the grit 400 side when the edge is very dull, nicked or damaged, and finishes on the grit 1000 side for fine sharpening.

Coarseness is measured in grit, where a higher value means a finer stone. The classification is as follows:

• Coarse stone up to 700 grit: removes small nicks or reprofiles the blade and leaves a rough surface that is followed up with a finer stone.
• Medium stone 800-2000 grit: everyday sharpening, best results if the surface is polished with a fine stone afterwards.
• Fine stone above 3000 grit: polishes the edge and removes scratches from earlier steps.

Technical Specifications

Package Contents

• Double-sided wet sharpening stone grit 400/1000
• Rubber holder
• Knife holder

Suitable for: Cooks maintaining steel knives. Carpenters sharpening chisels. Butchers and charcutiers. Tailors sharpening scissors.

Industries: Restaurants and commercial kitchens. Joinery and construction. Butchery and charcuterie. Textiles and sewing.

Frequently Asked Questions (FAQ)

Does the knife holder of wet sharpening stone T6140W suit knives 0.75 inch wide?

Yes, the knife holder is recommended for knives with a width of at least 0.75 inch. The grit 400/1000 stone is suitable for steel knives, scissors and chisels, and the holder has a ceramic surface against the sharpening stone.

How does wet sharpening stone T6140W differ from other sharpening stones?

T6140W has two grits in the same stone, grit 400 for restoring dull and damaged edges and grit 1000 for fine sharpening, plus a rubber holder and a knife holder with a ceramic surface in the kit. Polishing with a stone above 3000 grit is outside what the stone covers.