Abrasive Paper PS30D 115 mm Grit 40 Roll 50 m, Klingspor

Quick Facts — Klingspor KN174086 Abrasive paper roll

• Brand: Klingspor
• Model: KN174086
• EAN: 4014855053117
• Type: PS 30 D
• Grit: 40
• Width: 115 mm
• Length: 50 m

Klingspor PS 30 D is an abrasive paper roll, 115 mm wide and 50 m long, with grit 40 for coarse sanding of wood, paint, varnish and filler.

The abrasive is semi-open aluminium oxide on a type D paper backing, bonded with synthetic resin. The roll is sold per piece according to roll length.

What makes Klingspor PS 30 D a strong choice for sanding wood, paint and varnish?

The semi-open aluminium oxide grain on D paper backing is intended for sanding wood, paints, varnishes and filler. Grit 40 suits removal of larger amounts of material.

The roll format of 50 m at 115 mm width allows lengths to be cut as required instead of using ready-made sheets.

Is Klingspor PS 30 D suited to wood and painted surfaces?

Yes, the abrasive paper is intended for wood as well as painted or varnished surfaces and filler. The construction is defined by a synthetic resin binder and a type D paper backing:

• Backing: paper type D
• Abrasive: aluminium oxide, semi-open
• Binder: synthetic resin

Technical Specifications

Suitable for: Carpenters coarse sanding wood. Painters removing old paint and varnish. Floor sanders preparing surfaces. Site joiners levelling filler.

Industries: Joinery. Painting. Construction. Renovation. Furniture manufacturing.

Frequently Asked Questions (FAQ)

Is Klingspor PS 30 D suited to sanding off old paint and varnish?

Yes, Klingspor PS 30 D is intended for sanding wood, paints, varnishes and filler. Grit 40 is a coarse grit that removes a lot of material, leaving a rough surface that needs follow-up sanding with a finer grit.

How is Klingspor PS 30 D sold and how long is the roll?

Klingspor PS 30 D is sold per piece according to roll length. The roll is 50 m long and 115 mm wide.

What distinguishes Klingspor PS 30 D from other abrasive papers?

Klingspor PS 30 D uses semi-open aluminium oxide on a type D paper backing with a synthetic resin binder, in a 115 mm x 50 m roll with grit 40. This gives a coarse, flexible abrasive that is cut to length as required.