Abrasive Paper Ps30D 93 mm Grit 100 Roll 50 m, Klingspor

Quick Facts — Klingspor KN267050 Abrasive paper roll

• Brand: Klingspor
• Model: KN267050
• EAN: 5907560053499
• Type: PS 30 D
• Grit: 100
• Width: 93 mm
• Roll length: 50 m

Klingspor PS 30 D is an abrasive paper on a roll, 93 mm wide in grit 100, intended for sanding wood, paint, varnish and filler.

The 50 m roll gives a free length to cut as needed. The type D paper backing carries a semi-open coat of aluminium oxide, bonded with synthetic resin.

Why painters and joiners choose PS 30 D

The backing is type D paper with aluminium oxide as the abrasive grain. The semi-open coat leaves gaps between the grains, which suits materials such as paint, varnish and filler.

The binder is synthetic resin. Grit 100 gives an even fine sanding of the surface, and the roll form allows the length to be adapted to the job.

Where PS 30 D performs best

PS 30 D is used for sanding the following materials:

• Wood
• Paint
• Varnish
• Filler

The roll width of 93 mm and the length of 50 m suit work where the abrasive paper is cut to the required length.

Technical Specifications

Chosen by: Painters, joiners, filler applicators, surface finishers.

Found in: Painting, joinery, building work, renovation, varnishing.

Frequently Asked Questions (FAQ)

Is Klingspor PS 30 D suitable for sanding filler and varnish?

Yes. Klingspor PS 30 D in grit 100 is intended for sanding wood, paint, varnish and filler. The abrasive grain is aluminium oxide in a semi-open coat on type D paper backing.

How does Klingspor PS 30 D differ from other abrasive papers?

Klingspor PS 30 D has a type D paper backing, a semi-open coat of aluminium oxide and synthetic resin binder. The roll is 93 mm wide and 50 m long in grit 100, and is sold in pieces according to roll length.