Angle Grinder 1200 W 125 mm with Variable Speed 3000–12000 rpm, M14, incl. 10 Cutting Discs, Wuber

125 mm Variable Speed Angle Grinder with 10 Cutting Discs

• Brand: Wuber
• Model: W27474
• EAN: 5908239734022
• Type: Variable speed angle grinder
• Power: 1200 W
• Disc: 125 mm, 22 mm bore
• Accessories: 10 cutting discs, side handle and disc guard

The Wuber W27474 is a 1200 W angle grinder for 125 mm discs. Speed can be set between 3000 and 12000 rpm, so the tool runs gently where high speed would burn or wear the surface, and at full speed when cutting needs to be quick.

The box contains ten cutting discs, an extra side handle, a disc guard, spare carbon brushes and a spanner for changing discs, so the grinder is ready to use straight away. Swedish manual available on request.

What sets the variable speed angle grinder apart?

Speed control lets the same tool handle more kinds of work. Low speed gives better control when grinding and brushing, while full speed of 12000 rpm suits cutting. The angle grinder weighs 2.8 kg and can be held with both hands using the extra side handle. With spare carbon brushes in the box, worn brushes can be replaced without sending the tool for service.

Applications for the 125 mm angle grinder

The angle grinder takes standard 125 mm discs with a 22 mm bore on an M14 spindle. It is used for:

• cutting with the included cutting discs
• grinding and deburring with a grinding disc or flap disc
• brushing and cleaning with an angle grinder wire brush

Technical Specifications

Package contents

• Wuber angle grinder
• 10 cutting discs
• Extra side handle
• Disc guard
• Spare carbon brushes
• Spanner

Suitable for: DIY users, metalworkers, fitters, property caretakers and hobby welders who cut and grind on a smaller scale.

Industries: Renovation, metalwork and fabrication, property maintenance and mechanical workshops.

Frequently Asked Questions (FAQ)

Which discs fit the Wuber 1200 W 125 mm angle grinder?

The Wuber 1200 W angle grinder takes discs up to 125 mm in diameter with a 22 mm bore, on an M14 spindle. 150 or 230 mm discs will not fit under the guard. Accessories with an M14 thread, such as wire brushes, screw directly onto the spindle.

Can the Wuber 1200 W angle grinder be used on a standard wall socket?

Yes, the Wuber 1200 W angle grinder runs on 230–240 V / 50 Hz and plugs into a standard wall socket. At 1200 W it can share a circuit with other lighter equipment. Carbon brushes are wear parts, and spare brushes are included in the box.

How does the Wuber 1200 W variable speed angle grinder differ from a fixed-speed angle grinder?

The Wuber 1200 W angle grinder can be set between 3000 and 12000 rpm, while a fixed-speed angle grinder always runs flat out. The lower speed gives better control when grinding, brushing and polishing sensitive surfaces, where full speed can easily burn the material. Higher speed is used for cutting.