Ceiling Fan 140 cm 78 W 3 Steel Blades 13500 m³/h 5 Speeds with Wall Control White, Eberg

Key Facts — Eberg HTX Ceiling Fan 140 cm

• Brand: Eberg
• Model: HTX
• EAN: 5903357336615
• Type: Ceiling fan with steel blades and wall control
• Blade span: 140 cm
• Maximum airflow: 225 m³/min (13,500 m³/h)
• Maximum speed: 300 rpm

The Eberg HTX is a ceiling fan with a 140 cm span and three steel blades moving up to 13,500 m³ of air an hour at 300 rpm. Large steel blades combined with high speed produce a strong downward air stream, sized for warehouses, halls and commercial premises where a household fan falls short.

The motor has a nominal output of 78 W with copper windings. Speed is set in five steps from the wall control: 160, 200, 240, 270 and 300 rpm. The low step gives gentle air movement for continuous running, while the top setting is for heatwaves and spaces with many people or machine heat.

The housing is white gloss-finished steel, and the fan weighs 5.5 kg and stands 50 cm high. The box contains the fan, the wall control and a complete mounting kit with ceiling hook.

What makes the Eberg HTX a strong choice for warehouses and commercial spaces?

Air volume and blade material. Steel blades hold their shape over time instead of warping as plastic blades can in warm buildings, and 13,500 m³/h on the top setting is enough to create noticeable air movement even under a high roof. Five speed steps make it possible to find a level that cools without blowing paper and light materials around.

How the ceiling fan is used in warehouses, halls and shops

The ceiling fan is used to cool warehouses and halls through summer, circulate air in shops, showrooms and gyms, and in workshops and open-plan offices where air otherwise stagnates. Mounted centrally, it delivers even air movement across the work area without taking floor space.

Technical Specifications

What's in the box

• Eberg HTX ceiling fan 140 cm, white
• Wall control
• Mounting kit with ceiling hook

Used by: Warehouse managers, shop owners, gym owners, property managers and electrical installers.

Common in: Warehousing and logistics, retail and showrooms, training facilities, workshops and offices.

Frequently Asked Questions (FAQ)

Does the Eberg HTX ceiling fan have a winter mode?

No. The fan rotates left only and cannot be reversed, so it cannot be used to push warm air down from the ceiling in winter. It is a cooling fan for summer use and air circulation. The motor is also rated IP20, meaning the fan should only be installed in dry indoor spaces — not in wash bays, damp areas or covered outdoor locations.

What does installing the Eberg HTX ceiling fan require?

Fixed electrical installation with the wall control wired in series, to be carried out by a qualified electrician. The fan cannot be connected with a plug. A mounting kit with ceiling hook is included, but the fixing must carry 5.5 kg plus vibration in operation. The fan drops 50 cm, so with at least 2.3 m clear under the blades a ceiling height of around 2.8 m is needed — which most warehouses and halls have with room to spare.

What separates the Eberg HTX from a household ceiling fan with plastic blades?

Power and material. A typical household fan has ABS blades and a top speed around 200–220 rpm, suited to rooms of 20–30 m². The Eberg HTX has 140 cm steel blades, reaches 300 rpm and moves 13,500 m³/h, enough for spaces where a household fan is barely noticeable. The trade-off is no winter mode or light, and the noise on the top step suits commercial premises better than a bedroom.