Rail Mounts 2 Pack for Guide Rails Makita Festool Milwaukee ABS, StealthMounts

Quick Facts — StealthMounts Track Saw Rail Mount

• Brand: StealthMounts
• Model: OM-TRM-BLK-2
• Fits: Guide rails from Makita, Festool and Milwaukee
• Mounting: Screws to a wall or panel, used in pairs
• Material: Injection moulded ABS plastic with countersunk screw holes
• Quantity: 2 pcs per pack, black
• Made in Great Britain

The StealthMounts Track Saw Rail Mount gives the plunge saw guide rails a fixed place on the wall: the pair of mounts screws on, the rail hooks in and hangs flat — instead of leaning in the corner where it topples, dents and loses its straightness. The rail lifts in and out with two grips.

The mounts fit guide rails from Makita, Festool and Milwaukee, are injection moulded in ABS with countersunk screw holes and are used in pairs. Made in Great Britain. Genuine product, supplied through official European distribution.

Why the guide rail gets wall mounts of its own

Because the rail is the precision of the saw: a guide rail leaned against the wall, stepped on or dented along the reference edge gives crooked cuts however good the saw is. In the mounts the rail hangs flat with support at two points, out of reach of the floor traffic — straight when it was hung, straight when it comes down.

Where do the rail mounts earn their place?

On the joinery and garage wall where the rails hang in length order above each other — one pair of mounts per rail — and in the tool trailer where the rail otherwise lies loose on the bed among everything else. Even leftover wall areas behind doors and above windows will do: the rail is flat and needs only two fixing points in line.

Technical Specifications

Suitable for: Tradespeople, service technicians, installers and anyone running several tool batteries.

Industries: Construction, electrical, plumbing, vehicle service and mobile workshops.

Frequently Asked Questions (FAQ)

Which guide rails fit in the StealthMounts Track Saw Rail Mount?

Guide rails from Makita, Festool and Milwaukee — the mount grips the rail profile and is used in pairs spread well along the length of the rail. Rails from other makes with a similar profile may fit, but the three listed systems are what the mount is made and verified for.

How are the StealthMounts rail mounts fitted?

In pairs in line on a wall or panel, screwed into a stud or plywood through the countersunk holes. Place the mounts with good spread — roughly a quarter in from each rail end — and the rail hangs flat without flexing. Longer rails of 2.7–3 metres can take a third mount in the middle from an extra pack.

What sets the StealthMounts rail mounts apart from keeping the rail in its bag or leaned in the corner?

The protection of the straightness: in the corner the rail stands in the floor traffic where it gets knocked over and dented, and the bag only protects rails that actually get put back in it. The mounts make wall storage the path of least resistance — the rail hooks in within two seconds, hangs flat and visible, and the reference edge never meets the floor.