Self-Adhesive Protective Film 50 cm x 100 m, Blue PVC, Beast

Quick Facts — BST-250058 Protective film

• Model: BST-250058
• EAN: 5907698027102
• Type: Self-adhesive PVC protective film
• Dimensions: 50 cm x 100 m
• Total thickness: 45 µm
• Adhesive type: Acrylic adhesive
• UV resistance: 60 days

Self-adhesive PVC protective film from Beast, 50 cm wide and 100 m long, for temporary surface protection during renovation, construction and installation. The film has a total thickness of 45 µm and bonds with acrylic adhesive.

The film protects carpets, stairs, window sills, parquet, window frames and PVC against dirt, dust and scratches. It can be used both indoors and outdoors, and also during transport and storage of materials.

What sets protective film BST-250058 apart?

The film is built for temporary protection where the surface must be left clean after the work. It withstands 10°C to 60°C, is UV-resistant for 60 days and peels off without adhesive residue. The carrier is 40 µm PE and the total thickness is 45 µm.

The adhesive is an acrylic with a weight of 6 gr/m². Adhesion to steel is 3.5 N/cal and elongation is 300%, so the film follows the surface during application.

Is protective film BST-250058 suited to construction and renovation?

Yes, the film is used for surface protection during construction, renovation and installation work, both indoors and outdoors. It is applied to surfaces such as:

• carpets and stairs
• window sills and window frames
• parquet
• PVC surfaces

Technical Specifications

A fit for: Painters protecting window sills and joinery during work. Floor layers covering parquet and carpets. Construction workers protecting stairs during renovation. Installers protecting PVC surfaces during fitting.

Typical settings: Construction. Renovation and refurbishment. Property maintenance. Industry. Transport and storage of materials.

Frequently Asked Questions (FAQ)

Does protective film BST-250058 work for long-term outdoor protection?

No, the film is UV-resistant for 60 days and withstands 10°C to 60°C. Protective film BST-250058 is intended for temporary protection, outdoors as well.

Does protective film BST-250058 leave adhesive residue when removed?

No, the film is removed without adhesive residue. Protective film BST-250058 has acrylic adhesive with a weight of 6 gr/m² and adhesion to steel of 3.5 N/cal.

What separates protective film BST-250058 from other protective films?

Protective film BST-250058 has a 40 µm PE carrier, a total thickness of 45 µm and 300% elongation. It withstands 10°C to 60°C and is UV-resistant for 60 days, which extends the service life outdoors.