Torque Wrench 1/2" with Lock 28-210 Nm, Beast

Quick Facts — BST-820612 Torque wrench

• Model: BST-820612
• EAN: 5907698027546
• Type: Torque wrench with ratchet and lock
• Square drive: 1/2"
• Torque range: 28-210 Nm
• Accuracy: 1 Nm
• Length: 460 mm

The BST-820612 torque wrench from Beast is a 1/2" torque wrench for controlled tightening of screws and nuts in the 28-210 Nm range, above all when assembling complex units where the tightening torque must be documentable.

The torque is set with a ring on the handle in steps of 1 Nm and secured with the lock in the handle end. The ratchet has a switch for right and left working direction.

What makes torque wrench BST-820612 a strong choice for professional assembly?

The torque wrench has a wide working range of 28-210 Nm with setting in 1 Nm steps, covering tightening of heavier joints at a controlled torque. The lock in the handle end holds the set value so that it does not change during work.

The long 460 mm handle gives leverage for the higher torques in the range, and the square drive takes 1/2" sockets.

How torque wrench BST-820612 is used when assembling complex units

The wrench is used in assembly where the tightening torque is critical. The working sequence is as follows:

• Set the required torque by turning the ring on the handle, 1 Nm per step.
• Secure the setting with the lock in the handle end.
• Select the working direction with the switch on the ratchet, right or left.
• Fit a 1/2" socket on the square drive and tighten the joint.

Technical Specifications

Package Contents

• Torque wrench
• Plastic carry case

Chosen by: Vehicle mechanics tightening heavier joints. Fitters of machinery and complex units. Workshop technicians working to documented tightening torques.

Found in: Vehicle workshops. Mechanical engineering. Machine assembly. Service and maintenance.

Frequently Asked Questions (FAQ)

Is torque wrench BST-820612 suitable for small screw joints with a low tightening torque?

No. Torque wrench BST-820612 works in the 28-210 Nm range, so joints that require a torque below 28 Nm lie outside the setting range. The setting is made with 1 Nm accuracy.

How is the torque set on torque wrench BST-820612?

The torque is set by turning the ring on the handle with an accuracy of 1 Nm within 28-210 Nm. The value is then secured with the lock in the handle end, and the working direction is selected with the switch on the ratchet.

What distinguishes torque wrench BST-820612 from other torque wrenches?

Torque wrench BST-820612 has a wide range of 28-210 Nm, a lock for the set torque in the handle end, a left-right switch on the ratchet and a 460 mm long handle. It comes in a plastic carry case and weighs 1.9 kg.