Axle Stands 3 t, 285-415 mm, 9 Steps, 2 pcs, with Rubber Pads, Wuber Tools

Quick Facts — W22047 Axle stands

• Model: W22047
• EAN: 5905873309524
• Type: Axle stands, 2 pcs
• Capacity: 3000 kg per stand
• Lifting height: 285-415 mm
• Adjustment positions: 9

This set of two axle stands from Wuber Tools carries 3000 kg and gives working heights between 285 and 415 mm. The stands are built to support vehicles securely during workshop jobs.

Height is set in nine steps with a ratchet mechanism. A 12 mm steel pin and an additional cross pin lock the support, so the ratchet cannot release by accident. Rubber pads protect sills and chassis parts from damage.

Why workshop mechanics choose axle stands W22047

The axle stands W22047 have a wide base of 195 x 205 mm that spreads the load onto the floor. Welded cross profiles stiffen the base and stop it spreading under load.

Advantages in daily use:

• ratchet mechanism with nine adjustment positions
• 12 mm steel pin and an additional cross pin as a second lock
• rubber pads that protect sills and chassis parts
• two stands per set, 5.24 kg in total

Are axle stands W22047 suited to vehicle servicing and tyre changes?

Yes, as long as the vehicle's support point lies within the 285-415 mm lifting height and the load per stand does not exceed 3000 kg. The rubber pad rests against the sill or chassis and spreads the contact, and the nine positions allow the working height to be set in steps.

Technical Specifications

Package Contents

• Axle stand, 2 pcs
• Rubber pad, 2 pcs
• Original packaging

Chosen by: Vehicle mechanics in workshops. Tyre and wheel service technicians. Maintenance technicians in garages. Home mechanics with their own garage.

Found in: Car workshops. Tyre workshops. Vehicle servicing. Fleet maintenance. Light transport operations.

Frequently Asked Questions (FAQ)

Are axle stands W22047 suited to vehicles that need lifting above 415 mm?

No. The axle stands W22047 have a lifting height of 285-415 mm and carry 3000 kg per stand. Vehicles that need a higher support point or a greater load are outside their range.

How are axle stands W22047 locked at the chosen height?

Height is set in nine positions with a ratchet mechanism. A 12 mm steel pin and an additional cross pin prevent the ratchet from releasing by accident.

What distinguishes axle stands W22047 from other axle stands?

The axle stands W22047 have an additional cross pin as a second lock, welded cross profiles in the base and rubber pads against sill and chassis. The base measures 195 x 205 mm, and two stands are included in the set.