Duct Fan Axial IP65 Three-Phase 870W 12800m³/h Fibreglass Impeller, Sodeca

Duct Fan Axial IP65 Three-Phase 870W 12800m³/h Fibreglass Impeller, Sodeca

Quick Facts — Sodeca HEPT-56-4T/A Duct Fan

• Brand: Sodeca
• Model: HEPT-56-4T/A
• Type: Tubular axial fan (duct fan) with IP65 motor
• Power, free discharge: 870 W
• Maximum airflow: 12,800 m³/h
• Noise level: 72 dB(A)
• Weight: 28.0 kg
• Protection rating: IP65

This duct fan from Sodeca is a tubular axial fan with a fibreglass-reinforced polyamide-6 impeller and a three-phase 870 W motor delivering up to 12,800 m³/h maximum airflow. The motor is class F with ball bearings and IP65 protection, making the fan suited to continuous operation in demanding industrial ventilation systems.

In the A execution, air passes over the impeller before passing over the motor – the reverse of the standard H execution (motor to impeller). The finish is an anti-corrosive polyester resin, polymerised at 190°C after phosphate-free nanotechnology degreasing, providing good protection in humid and mildly corrosive operating environments.

What makes the Sodeca duct fan a strong choice for industrial ventilation?

The fan combines a robust motor design with long-term reliability: the class F motor has ball bearings and a built-in PTC sensor protecting against overheating, and the -25°C to +60°C operating temperature range covers both cold storage facilities and warm process environments. Three-phase supply (220-240/380-415V, 50Hz) provides steady, stable operation under continuous load, and the anti-corrosive finish extends service life in humid or mildly corrosive atmospheres compared to untreated steel.

What does the construction and casing include?

The impeller is made of fibreglass-reinforced polyamide-6, a material combining low weight with high mechanical strength. The fan body itself is a tubular casing in sheet steel, and the electrical connection is made via an external junction box rated IP65 – the same protection level as the motor. The entire construction is therefore protected against dust and water jets, making the fan suitable even for outdoor-mounted or moisture-exposed installations.

Is the Sodeca duct fan suited to industry and agriculture?

Yes. The anti-corrosive finish and IP65-rated components make the fan suitable for ventilation in livestock buildings, warehouses, workshops and process industry where humidity is high or the atmosphere contains mildly corrosive substances. With a maximum flow of 12,800 m³/h, it suits larger spaces requiring powerful mechanical ventilation, and the duct connection (øA 660 mm) makes it compatible with standardised ventilation ducting of corresponding dimension.

How to read Sodeca's type code

The model code HEPT-56-4T/A is built according to Sodeca's standard system: HEPT denotes a tubular axial fan with IP65 motor, 56 is the impeller diameter in cm, 4 indicates the number of motor poles (a 4-pole motor runs at roughly 1400 rpm at 50Hz), T stands for three-phase (M denotes single-phase), and /A indicates airflow direction from impeller to motor (inlet execution) – the reverse of the standard H execution where air flows from motor to impeller. On request, execution /F (complete motor, impeller and grille assembly) and /G (motor and impeller unit without grille) are also available, along with special windings for other voltages.

Technical Specifications

Suitable for: Ventilation installers, industrial facilities, agricultural buildings, workshops and process industry.

Industries: Industrial ventilation, agriculture and livestock housing, facilities management, and process industry requiring corrosion resistance.

Delivery Time

Estimated delivery time: 8–10 weeks.

Basic Accessories (NOT included, can be ordered separately)

Frequently Asked Questions (FAQ)

Is the Sodeca duct fan HEPT-56-4T/A suitable for humid and mildly corrosive environments?

Yes. The anti-corrosive polyester resin finish, polymerised at 190°C after phosphate-free degreasing, combined with IP65-rated motor and junction box, makes the fan well suited to humid spaces such as livestock buildings and process facilities. The -25°C to +60°C operating temperature range covers most indoor and outdoor conditions. For highly aggressive chemical atmospheres, compatibility should always be checked separately.

What connection dimensions are needed to mount the HEPT-56-4T/A in a ducting system?

The fan has a duct connection of øA 660 mm and øB 620 mm, with a total length (F) of 278 mm and a motor length (E) of 260 mm. Mounting is via 12 holes of øJ 12 mm around the casing, matching standardised duct flanges of corresponding dimension.

What sets the /A execution apart from the standard HEPT-56-4T/H execution?

The difference lies solely in airflow direction: in the A execution, air passes over the impeller before passing over the motor, while the standard H execution directs air from motor to impeller. Electrical data, performance and physical dimensions are identical since the same motor and impeller combination is used – the choice between H and A depends on how the ducting is routed and the direction air needs to flow.