Portable Tubular Axial Duct Fan, Industrial Fan 18300 m³/h, 63 cm, Sodeca

Quick Facts — Sd-HTM-63 Portable duct fan

• Model: Sd-HTM-63
• Type: Portable axial duct fan
• Diameter: Ø 630 mm
• Max air flow: 18300 m³/h
• Power: 1.1 kW
• Connection: 3-phase 400 V
• Protection class: IP55

Portable axial duct fan with Ø 630 mm and a maximum air flow of 18300 m³/h for spot cooling, drying and extraction on building sites and in industrial premises. It belongs to the HTM series from Sodeca and is the most powerful model in the series.

The fan has a tubular sheet steel casing, a fibreglass-reinforced polyamide-6 impeller and protective grilles on both sides pursuant to UNE-EN ISO 12499. Air flows from motor to impeller. Maximum sound level is 74 dB(A) and the air exit speed is 58 km/h at a distance of 3 metres.

Why builders and plant operators choose portable duct fan HTM-63

The fan is mobile and stand-mounted, so it is moved to where air circulation is needed. The motor is a 1.1 kW three-phase 400 V unit with IE3 efficiency, class F insulation, ball bearings and IP55 protection. The finish is polyester resin polymerised at 190ºC after degreasing with a phosphate-free nanotechnological treatment.

Power connection is through a built-in CETAC P17 plug for 3P + T 16 A. A manually resettable junction box with on-off switch prevents accidental start-up (EN ISO 12100). A module for power control is available as an option.

Where duct fan HTM-63 performs best

The fan is used where large air volumes must be moved locally at operating temperatures between -25ºC and +50ºC. Typical uses are:

• Spot cooling of workstations and machinery.
• Drying of spaces after water damage or wet work.
• Extraction and ventilation in enclosed spaces.

Technical Specifications

A fit for: Site managers. Plant operators in industry. Restoration technicians. Maintenance engineers.

Typical settings: Construction. Drying after water damage. Engineering workshops. Temporary ventilation of enclosed spaces.

The freight price is preliminary and may change depending on what and how much is ordered at the same time. If there are changes, we will let you know in good time.

Frequently Asked Questions (FAQ)

Is duct fan HTM-63 suitable for environments with high ambient temperature?

Yes, up to +50ºC. The operating temperature range is -25ºC+ 50ºC and the motor has class F insulation and IP55 protection. The enclosure withstands splashes but is not intended for hosing down.

How is duct fan HTM-63 started and protected when connected to power?

The fan has a manually resettable junction box with on-off switch that prevents accidental start-up (EN ISO 12100). Power connection is through a built-in CETAC P17 plug for 3P + T 16 A, 3-phase 400 V.

What distinguishes duct fan HTM-63 from other portable fans?

HTM-63 is the most powerful model in the HTM series with Ø 630 mm and a maximum air flow of 18300 m³/h. It has protective grilles on both sides, a stand, an IE3 motor and IP55 protection. The series also covers models with diameters of 35-56 cm and air flows from 3100 m³/h.