Press Pin Set for Workshop Press 8 Pins 2–20 Tonne Hardened Steel 25 mm Ram Adaptor with Rack, Kraft&Dele

Key Facts — Kraft&Dele KD5877 Press Pin Set for Workshop Press

• Brand: Kraft&Dele
• Model: KD5877
• EAN: 5903957015781
• Type: Pin set for hydraulic workshop press
• Number of pins: 8 (marked 2T–20T)
• Ram adaptor: for 25 mm mounting diameter
• Weight: 7 kg

The Kraft&Dele KD5877 pin set gives a workshop press eight hardened steel pins for pressing bearings, bushes, bolts and pins in and out. The pins are marked 2T, 3T, 8T, 12T, 14T, 16T, 18T and 20T by press capacity, so the right pin is chosen to match the press size and the load of the job.

Each pin has a smooth working face, giving even contact with the part and reducing the risk of marking or damaging what is being pressed. The hardened steel holds its shape through repeated high-load pressing.

The set includes a ram adaptor that fits into the press piston at a 25 mm mounting diameter, plus a plate and a rack with fixings. The rack bolts onto the press so the pins hang together beside the work point rather than lying scattered across the bench.

Key benefits of a press pin set for the workshop press

The right tool instead of improvised drifts. Sockets, bolts and pipe offcuts used as press pins crack or buckle under pressure and can shoot out of the press. With hardened steel pins sized by press capacity and with a flat working face, force goes straight through the part and the work becomes safer and more precise.

Applications for the press pin set

The pin set is used for replacing wheel bearings, bushes in control arms and shock absorber mounts, pressing out bolts and pins, and general pressing and straightening in car workshops, machine shops and agricultural workshops. Eight pins from 2T to 20T cover both small bench presses and larger floor presses.

Technical Specifications

What's in the box

• 8 press pins, marked 2T, 3T, 8T, 12T, 14T, 16T, 18T and 20T
• Ram adaptor for piston mounting, 25 mm mounting diameter
• Plate
• Rack with fixings

A fit for: Vehicle mechanics, machine repairers, agricultural mechanics, tyre and wheel shops and home mechanics with their own press.

Typical settings: Car workshops, machine and agricultural workshops, service centres and home workshops.

Frequently Asked Questions (FAQ)

Does the Kraft&Dele KD5877 pin set fit every workshop press?

No, the ram adaptor is made for press pistons with a 25 mm mounting diameter. Measure the piston fitting before ordering — if the press uses another size, the adaptor will not fit without a reducer. The pins themselves work regardless of press make, but choose them by press capacity: they are marked from 2T to 20T and must not be loaded beyond the stated tonnage.

How do I choose the right pin in the Kraft&Dele KD5877?

By press capacity and the size of the part. The pins are marked 2T, 3T, 8T, 12T, 14T, 16T, 18T and 20T — use the one matching your press, never a lower-rated pin in a stronger press. The pin diameter should be slightly smaller than the bore or bearing being pressed so it follows through without binding. The smooth working face must sit flat against the part.

What separates the Kraft&Dele KD5877 from using sockets or bolts as press pins?

Strength and safety. Sockets are made for torque, not axial pressure, and can crack or burst when a hydraulic press puts several tonnes on them. Bolts and pipe offcuts buckle and slip. The KD5877 pins are hardened steel with a flat working face, sized by press capacity from 2 to 20 tonnes, and kept together on a rack mounted on the press.