Self-Levelling Cross Line Laser Red, Laser Level 20 m, 2 Lines, IP 54, Kapro

Quick Facts — Kapro KA862 Cross line laser

• Brand: Kapro
• Model: KA862 Prolaser
• Type: Self-levelling cross line laser, red
• Range: approx. 20 m
• Levelling accuracy: +/- 2 mm at 10 m
• Levelling time: <3 sec
• Protection class: IP 54

The Kapro KA862 Prolaser is a self-levelling cross line laser with one horizontal and one vertical red line at 90° to each other, built for setting out, fitting and levelling where accuracy and speed matter. The lines reach up to 20 m depending on the distance to the surface the laser is projected onto.

The laser attaches with dual magnets and a V-shaped back that grips pipes and rounded objects. The hook-and-loop strap fixes it around posts and studs, and the 1/4" mount takes it onto a tripod or laser pole.

Key benefits of the KA862 Prolaser cross line laser

The KA862 levels itself within +/-5° in under 3 sec, with an accuracy of +/- 2 mm at 10 metres. The lines can run separately or together, and they flash as soon as the laser is out of level.

Benefits in daily work:

• Dual magnets and a V-shaped back for fixing on pipes and rounded objects.
• Hook-and-loop strap for mounting around posts and studs.
• Tilt mode that locks the lines in the chosen position so the laser can be angled freely for manual levelling.
• IP 54 protection against dust, rain and splashes, operating from -10°C to +50°C.

How the KA862 Prolaser cross line laser is used for setting out and levelling

The KA862 is used for setting out, fitting and levelling where demands on accuracy and speed are high. The horizontal and vertical lines form a cross that gives a reference in both directions, and tilt mode lets the laser be angled in any position once the lines are locked. Runtime is approx. 10 hours on 2 x 1.5 V AA batteries, which are not included.

Technical Specifications

Package Contents

• Kapro KA862 cross line laser
• Hook-and-loop strap
• Soft protective bag

A fit for: Site carpenters setting out lines for fitting. Interior joiners levelling cabinets and trims. Scaffolders and framers fixing the laser on posts. Pipe fitters mounting the laser on pipes.

Typical settings: Building and construction for setting out and fitting. Carpentry and interior fit-out. Pipe installation. Outdoor work in rain and splashes.

Frequently Asked Questions (FAQ)

Does the Kapro KA862 cross line laser handle rain and hosing down?

Partly. The KA862 is IP 54 rated and protected against dust, rain and splashes, but the rating does not cover hosing down or immersion. Operating temperature is -10°C to +50°C.

How fast and accurate is the Kapro KA862 cross line laser at levelling?

Levelling takes under 3 sec within a self-levelling range of +/-5°. Accuracy is +/- 2 mm at 10 metres, and the lines flash when the laser is out of level.

What sets the Kapro KA862 cross line laser apart from other line lasers?

The KA862 has dual magnets, a V-shaped back for pipes and rounded objects, and a hook-and-loop strap for posts and studs. It also has a tilt mode that locks the lines for manual levelling, and a 1/4" mount for tripod and laser pole.