- Stock: In Stock
- Brand: Harmann Ventilatoren
- Model: WAX-550-W-4-750S
- Weight: 31.00kg
Quick Facts — WAX-550-W-4-750S Axial exhaust fan
- Model: WAX-550-W-4-750S
- Type: Wall-mounted axial exhaust fan
- Blade diameter: 550 mm
- Airflow: 7500 m³/h at 140 Pa
- Power: 550 W, 230V / 50 Hz
- Ingress protection: IP54
- Variant: Exhaust (A→) or supply (←V)
Harmann WAX-550-W-4-750S is a wall-mounted axial fan with a 550 mm blade diameter for exhaust or supply of clean, non-dusty air in industrial, commercial and warehouse premises. The single-phase asynchronous 230V motor draws 550 W and delivers 7500 m³/h at 140 Pa.
The flat motor with external rotor takes up little installation depth. The housing is powder-coated steel plate and the rotor blades are black-painted steel, dynamically balanced to class G4 per DIN ISO 1940. A gravity louvre and a junction box are included.
When does axial exhaust fan WAX-550-W-4-750S make the most sense?
The fan suits openings in a wall where clean, non-dusty air is to be moved out or in and 7500 m³/h at 140 Pa is enough. Mounting is from the inside only, from the room side. Speed can be regulated by voltage regulation via an external transformer or electronic controller, so airflow can be reduced when demand is lower.
The motor has integrated thermal protection that trips at 150-160 °C and resets automatically at 90-120 °C, with insulation class F (155 °C). This suits installations at height where manual reset is difficult.
Applications for axial exhaust fan WAX-550-W-4-750S
The fan is used for exhaust or supply in these settings:
- production halls and warehouses
- commercial kitchens with extraction ducts free of greasy air
- offices with separate air handling
- sports halls and retail premises
The gravity louvre opens under the airflow and closes by gravity when the fan is stopped, keeping out cold outdoor air, rain, snow and insects. The fan must not be used for air containing chemically aggressive, corrosive or explosive gases.
Technical Specifications
| Noise level (at 3 m) | 73 dB(A) |
| Max operating temperature | 60 °C |
| Insulation class | F (155 °C) |
| Motor | Single-phase asynchronous with external rotor |
| Thermal protection | Integrated, trips 150-160 °C, resets 90-120 °C |
| Housing material | Powder-coated steel plate, black |
| Rotor blades | Black-painted steel, balanced class G4 (DIN ISO 1940) |
| Speed regulation | Voltage regulation |
| Weight | 21 kg |
| Mounting | Wall, from the inside |
Package Contents
- Axial exhaust fan
- Gravity louvre
- Junction box
A fit for: Ventilation fitters, plant operators in industrial premises, facility technicians, electrical installers.
Typical settings: Industry and manufacturing, warehousing and logistics, commercial kitchens, sports facilities, retail premises.
Frequently Asked Questions (FAQ)
Is WAX-550-W-4-750S suitable for extracting damp or chemically loaded air?
No. The fan is intended for clean, non-dusty air and must not be used for chemically aggressive, corrosive or explosive gases. IP54 protects against dust and water splashes but not against hosing down, and the maximum operating temperature is 60 °C.
Can the speed of WAX-550-W-4-750S be regulated?
Yes. The fan is compatible with voltage regulation using an external transformer or electronic controller. Rated values are 7500 m³/h at 140 Pa and 550 W at 230V / 50 Hz.
What distinguishes WAX-550-W-4-750S from other wall-mounted exhaust fans?
It has a flat motor with external rotor giving low installation depth, thermal protection with automatic reset and an included gravity louvre. The rotor is balanced to class G4 and the fan is available as exhaust (A→) or supply (←V).
| Other | |
| Diameter Ø (mm) | 550 |