SmartHook Universal Holder Wall Mounted Flexible Grip for Tools, SmartHook

Quick Facts — SmartHook Universal Holder

• Brand: SmartHook
• Model: SHx1
• EAN: 7350098270001
• Fits: Hand tools and utensils with approx. 3–17 mm grip thickness
• Construction: Two-part — hard ABS backplate + flexible grip section
• Size: 19.5 × 4.6 cm, 4.2 cm deep per holder
• Mounting: Screws through the backplate holes (screws not included)
• Made in Sweden

The SmartHook is the universal holder that grips most things: the tool presses into the flexible grip, which forms around the shaft and holds it until pulled out. Screwdrivers, brushes, pliers, pens and cables — anything with a grip thickness of roughly 3 to 17 mm gets a place on the wall instead of the bottom of the drawer.

The holder is two-part: a hard ABS backplate that screws on and a soft grip section that presses onto it. Mounts on a tool board, wall, cabinet door inside or van panel. Genuine product, supplied through official European distribution.

What sets the SmartHook apart among tool holders?

The span of the grip: the same holder takes the thin pen and the thick pliers handle, because the grip section forms around whatever presses in — no holder needs choosing per tool. That makes the SmartHook the collector of the tool wall: the row that takes all the mixed items the shape-moulded mounts do not fit.

Where does the SmartHook earn its place?

On the tool board in garage and workshop where the mixed small tools should come up out of the drawers, inside the cleaning cabinet for brushes and scrapers, at the desk for pens and cables, and in the van where the grip keeps the tool still while driving. Screw the backplate into a stud or board with screws that suit the surface — and watch the row grow, because one SmartHook tends to become several.

Technical Specifications

Suitable for: Tradespeople, service technicians, installers and anyone running several tool batteries.

Industries: Construction, electrical, plumbing, vehicle service and mobile workshops.

Frequently Asked Questions (FAQ)

Which tools fit in the SmartHook universal holder?

Most things with a grip thickness of roughly 3–17 mm: screwdrivers, pliers, brushes, scrapers, pens, rulers and cables — even leisure kit such as ski poles. The grip section forms around the shaft, so exact shape matters less than thickness.

How is the SmartHook fitted?

In two steps: lift the soft grip section off, screw the hard backplate to a wall, board or door through the oval holes, and press the grip section back on so the backplate arms sit in all the holes of the grip. Screws and plugs are not included — choose for the surface, with a flat screw head.

What sets the SmartHook apart from an ordinary tool hook?

The grip: a hook needs the tool to have an eyelet or a head that can hang, while the SmartHook clamps around the shaft itself — the tool sits held rather than resting loose, and even eyeless tools like brushes and drivers get a place. The same holder also covers the whole span from pen to pliers.